Fortune Ferromet Inc.

S 410 refers to an Indian Standard for cold-rolled brass, covering several alloys like CuZn30, CuZn37, and CuZn40, with the primary composition being Copper (Cu) and the balance Zinc (Zn), plus maximum limits for impurities like Lead (Pb) and Iron (Fe). For CuZn30 (Cartridge Brass), it's typically 68.5-71.5% Copper, balance Zinc, with <0.05% Pb, <0.05% Fe. 

Titanium Gr 2 Round Bar wires, Suppliers of ASTM B348 Ti. Alloy Gr. 2 Hex Bar, Grade 2 Titanium Alloy Forged round Bar wires Exporter, Titanium Gr 2 Square Bar, Titanium WERKSTOFF NR. 3.7035 Round Bars Manufacturer in India.
Titanium Gr 2 Bar, ASTM B348 Titanium Grade 2 Round Bar wires, Titanium UNS R50400 Bright Bar wires, Titanium Gr 2 Hexagonal Bar, Titanium Round Bar, Titanium Alloy Grade 2 Rods Suppliers and Dealer in Mumbai, India.

ASTM A753  Type 4  Ni80-Mo5-Fe bal  (aka Alloy 80/HyMu 80) / N14080

Precision Rolling,   Custom Tempers,   Annealing,   Slitting,   Flattening/Leveling.   DFARS compliant
Thickness:  .002" to .125"      Width:  .062" to 12.5"      Cut to Length:  4" to 12 ft. 

Titanium Alloy Grade 5 Rods, Titanium Gr 5 Bar, ASTM B348 Titanium Grade 5 Round Bar wires, Titanium Gr 5 Hexagonal Bar, Titanium UNS R56400 Bright Bar, Titanium Round Bar wires Suppliers and Dealer in Mumbai, India.
Titanium WERKSTOFF NR. 3.7165 Round Bar wires, Titanium Gr 5 Round Bar wires, Suppliers of ASTM B348 Ti. Alloy Gr. 5 Hex Bar, Grade 5 Titanium Alloy Forged Bar wires Exporter, Titanium Gr 5 Square Bar Manufacturer in India.

Alloy 600 / UNS N06600  Ni72-Cr14-Fe6  Stocking Strip / Coil and 0.217” Dia Wire

recision Rolling,   Custom Tempers,   Annealing,   Slitting,   Flattening/Leveling.   DFARS compliant
Thickness:  .002" to .125"      Width:  .062" to 12.5"      Cut to Length:  4" to 12 ft.

ALUMINUM ALLOY 7075 GENERAL DESCRIPTION:

What is Aluminum 7075?

Aluminum 7075 is a heat-treatable aluminum alloy with zinc as the primary alloying element. It has moderated formability when in the fully soft, annealed temper and can be heat-treated to strength levels that are comparable to many steel alloys.

CHEMICAL COMPOSITION LIMITS:

Compositions are listed as weight percent. Limits are given as a maximum unless indicated as a range.

Composition according to Aluminum Association.

TYPICAL MECHANICAL PROPERTIES DATA of ALUMINUM 7075:The following typical aluminum 7075 properties are not guaranteed since in most cases they are average for various sizes and methods of manufacture and may not be exactly representative of any particular product or size. The data is intended for comparing alloys and tempers and should not be used for design purposes. 

Source: Aluminum Standards & Data and United Aluminum data base

United Aluminum can supply 7075 in the annealed temper for maximum formability. The formed 

Aluminum Round Bars Stockist, Aluminium WERKSTOFF NR. 3.1254 Round Bars, Aluminium 5086 Bar, ASTM B221 Aluminium 5052 Round Bars, Aluminium 5083 Square Bar, Aluminium 6082 Forged Bars Dealer in India.
Aluminum 1100 Rods Suppliers, ALuminum 7075 Round Bar, Aluminium 5086 Bar, ASTM B221 Aluminium Hex Bar, Aluminium UNS A96082 Bright Bar Manufacturer in Mumbai, India

Grades of Aluminium Plates

Aluminium Plates are available in different grades, each with unique properties tailored to specific applications. Here are some of the most common grades:

Grade 1100

• Properties: High corrosion resistance, excellent workability, and thermal conductivity.
• Uses: Chemical equipment, food processing, and decorative trim.

Grade 3003

• Properties: Good strength, formability, and corrosion resistance.
• Uses: HVAC systems, fuel tanks, and general fabrication.

Grade 5052

• Properties: High fatigue strength, excellent weldability, and marine-grade corrosion resistance.
• Uses: Marine applications, automotive parts, and electronic chassis.

Grade 6061

• Properties: High strength, excellent machinability, and good corrosion resistance.
• Uses: Structural components, aerospace parts, and heavy-duty structures.

Grade 7075

• Properties: Extremely high strength, used in high-stress applications.
• Uses: Aerospace components, military equipment, and high-performance machinery.