Fortune Ferromet Inc.

Fortune Ferromet is a leading Monel Round Bar manufacturer and supplier in different grades, types and dimensions. There are Monel 400, 450, 500 and other grades based on the composition difference. These grades also have different mechanical properties. The Monel 400 Round Bar costs less than the other grades and is one of the most used monel grades. There are round, hex, square, rectangular and other types of bars that are used in different application types.

The Monel 400 Flat Bar and other bars have carbon, 28% copper, iron, 63% nickel, phosphorus, lead, sulfur, silicon and manganese in the composition. The lead content is limited to a maximum of 0.005%. The Monel 400 Hex Bar is used mostly for its high strength due to the shape and in structural applications. The material has 550MPa minimum tensile strength and 450MPa minimum yield strength. The 2.4068 Alloy 400 Rod has different dimensions according to the different ASME and ASTM standards.

The diameter of the round bars range from 0.1mm to 100mm for different types such as wires, bars and rods. As a leading supplier, we maintain a good ASTM B164 UNS N04400 Bar Stock in hand and we can cover any of your orders. The length of the bars range from 100mm to 3000mm. There are different finishes to the bars that range from black, painted and UNS N04400 Bright Bar types. The finishes enhance the corrosion resistance properties of the products. The material has very good ductility, thermal conductivity, alkaline resistance and general corrosion resistance as well. Please contact us to know more about the different types of bars such as the Monel 400 Square bar and others with the prices.

Table of Content

• Specification And Material Grade Of Monel Round Bar
• monel 400 round bar price
• Most Frequent Types Of ASTM B164 UNS N04400 Bar
• Our Stock list of Nickel Alloy 400 bar
• Nickel Alloy 400 Bar Performance
• ASTM B164 UNS N04400 Bar Surface finish
• Minimum Yield Strength Chart Of Monel 400 Flat Bar
• Chemical Structure Of ASTM B164 UNS N04400 Rod
• Equivalent Table Of ASME SB164 2.4068 Hex Bar
• UNS N04400 Round Bar Size Chart
• 400 Monel Round Bar Weights
• Typical Application of Nickel 400 bar
• Nickel Alloy 400 Bar Tolerances

 

MONEL® alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging. The composition of the alloy is given in Table 1. Typical applications for MONEL alloy K-500 products are chains and cables, fasteners and springs for marine service; pump and valve components for chemical processing; doctor blades and scrapers for pulp processing in paper production; oil well drill collars and instruments, pump shafts and impellers, non-magnetic housings, safety lifts and valves for oil and gas production; and sensors and other electron

Table 1 - Limiting Chemical Composition, %, of MONEL Alloy K-500 Nickel (plus Cobalt) .....................................................63.0 min. Carbon........................................................................0.25 max. Manganese ...................................................................1.5 max. Iron..............................................................................2.0 max.
Sulfur ........................................................................0.01max. Silicon .......................................................................0.5 max.
Copper ......................................................................27.0 - 33.0 Aluminum ..................................................................2.30 - 3.15 Titanium ....................................................................0.35 - 0.8

Specification
UNS N05500/Alloy K500/ Monel 500/2.4375
ASTM B865

Size:
40mm to 200mm

we are the leading supplier in all types of products we deliver all types of flanges and pipe fittings at best rate possible

we are the leading supplier in all types of products we deliver all types of flanges and pipe fittings at best rate possible